Create a Stable DIY Monstera Planter That Stands Tall!
Create a Stable DIY Monstera Planter That Stands Tall!
Transform your gardening game by crafting a weighted monstera pot with an embedded support pole in just one afternoon. Watch your Monstera deliciosa thrive as it climbs in style!
Avoiding Disaster with a Pot Designed for a Monstera
Growing a magnificent Monstera deliciosa that gracefully ascends a tall support is a rewarding journey, but it often comes with its fair share of challenges. After months of watching my coconut coir pole lean precariously, I realized it was time for a sturdy planter setup. Let’s prevent any mishaps and create a pot that’s perfect for your monstera!
Gather Your Supplies
Before you begin, here’s a list of everything you’ll need:
- Clay Pot: Opt for a large, heavy clay pot with a drainage hole, at least 12 inches tall.
- Tubing: Obtain 6 inches of ½ inch diameter tubing to create a new drainage hole.
- Quikrete Fast-Setting Concrete Mix: Choose a quick-setting mix that allows you enough time to work (sets in 20-40 minutes).
- Lumber: A 4-5 foot piece of 2″x2″ or 2″x4″ lumber for your support pole.
- Burlap: Find the widest burlap you can for wrapping around the support pole.
Essential Tools
In addition to your supplies, you will need:
- Staple gun and ½” staples
- Painters or masking tape
- Bucket for mixing concrete
- Trowel for mixing
- Face mask and gloves
Let’s Create Your Monstera Planter
Follow these steps to build your stable monstera pot:
- Insert the tubing into the existing drainage hole, ensuring it protrudes about an inch from the bottom. Secure it with tape.
- Wrap the burlap around the lumber diagonally, securing it with staples every six inches as you wrap.
- Once you reach the top, fold the burlap and staple it for a clean finish.
Setting Up Your Support Pole
Position the support pole in the pot, either centrally near the drainage tubing or towards one side for better stability. You may need clamps or an extra set of hands to keep it upright while the concrete sets.
Working with Quick Mixing Concrete
Concrete is alkaline, so be sure to wear protective gear. Using about one-third of the bag, mix the concrete in a bucket until it reaches a soupy oatmeal consistency—no dry patches should remain.
Pour the mixture into the bottom of the pot gradually, using your trowel to press it down and eliminate air pockets. Aim for about three inches of depth.
Finishing Touches
Allow your planter to sit and dry. For best results, let it cure for 2-3 days before introducing your Monstera. You’ll have a robust planter that can handle the weight of your beautiful plant without tipping over.
Conclusion
Your DIY monstera planter is now complete! With its sturdy construction and improved support, you can enjoy the beauty and growth of your Monstera deliciosa without the fear of it falling over. Happy planting!
